Niveo Professional
Design Guide

What to bring to a broadcast IP design review

A topology, traffic matrix, and failure scenarios make it possible to review a media fabric before the equipment is ordered.

· 5 min read

Draw the physical and logical topology

Identify switch roles, port speeds, endpoint placement, and media and management networks. Mark any paths that must remain available during a failure.

Make timing and traffic explicit

Include stream formats and rates, multicast paths, and the planned timing architecture. Where A and B networks are required, document which components and physical paths are independent.

Agree how the system will pass

Define acceptance criteria for normal load, failure recovery, and monitoring. Record the hardware and software versions used for each test and keep the results with the design.

Further reading